From CosplayWiki

Contents 1 How to Make an ANBU Mask 1.1 Materials 1.2 Tools 1.3 Procedure

How to Make an ANBU Mask

Today I hope to help all of you amazing cosplayers make a nice looking ANBU Mask for under $20!

Materials

• Plastic Mask of a full human face.
  

  
• At least 2 packages of White Crayola Model magic.
• Black Elastic Band 1/2 inch wide. (At least 15 inches long)
• Super glue.

All of the above items can be purchased at your neighborhood Hobby Lobby.

Tools

• A rolling pin. (Any kind will do but wood seems to work best)

Procedure

1. Lay out all of your materials in front of you.

2. Take the white molding substance out of the TWO packages of Crayola Model Magic and form both rectangles into ONE big ball.

3. Find a clean flat surface and lightly apply pressure to the ball. Press the ball down until it is flat enough to roll.

4. Roll the clay until it is about one centimeter thick or until the clay "sheet" is large enough to fit completely over the mask.

5. Place the clay "sheet" over the mask (make sure that the clay covers the entire front part of the mask) and lightly press/stretch the material to give a seamless appearance to the mask.

Note: I stretched the edges of the clay to cover the inner edge of the mask.

Note: This is a very forgiving type of molding clay but if you accidentally scratch or press your hand into the material before it dries it will leave an unflattering mark.

This took me a few times to get it right so please don't get discouraged if you don't get it on the first try.

6. GENTLY poke/push around the eye area to show the mask's eye holes.

7. IMPORTANT: Pull/Cut off the excess molding clay that is jutting out from the back of the mask.

8. Take the excess clay that you pulled off from the back of the mask and make two small balls from it. Then mold those balls into an ear shape.

9. DO NOT ATTACH THE EARS TO THE MASK YET. Now you should have three parts formed. (Throw any excess clay away because it will dry out and be unusable.)

Get up from wherever you are and leave the mask and ears alone. Go back to your workstation in a few hours.

10. Super glue the now dry items together.

11. Cut a piece of black elastic so that it is about fifteen inches long without being stretched. Super glue the elastic band to the inside of the mask.

12. Congratulations!!! You have made the base to your very own Naruto mask!

From here you can paint, sharpie, etc. to your mask to give it a true ANBU appeal.

I hope my tutorial helped you and I most certainly hope that you had a fun time expressing your artistic ability.