Lavi's Hammer

From CosplayWiki

Image:Http://s188.photobucket.com/albums/z311/dgray-/02/man195qx4.jpg

Materials:

          Black duct tape
          White Duct tape
          8" sonar tube (found at home depot or lowes)
          Broomstick
          Heavy duty glue
          1/2' thick peice of wood at least 8"by 16"

Instructions:

    Step 1: Cut sonar tube so that the tube is now about 1.5 to 2 feet long (depends on your size preference.
    Step 2: Cut holes in the top and bottom of the center of the sonar tube. 
    Step 3: Cut wood into two 8" diameter circles that will fit inside the sonar tube nice and snug.
    Step 4: Wrap the broom stick in black duct tape. At the end wrap about 1" of the white duct tape.
    Step 5: Stick the non-white end of the broomstick through both holes of the sonar tube so that the broomstick sticks out about an inch. Use a lot of glue to make the broomstick connect to the sonar tube. Let dry.
    Step 6: Using the black and white duct tape, make stripes on the sonar tube lenghtwise. also cover one side of each of the wood circles.
    Step 7: Glue the crcle to the ends of the sonar tube so you get on solid cylinder. 
    Step 8: Make a cross out of black duct tape and connect it to the top of the hammer.